Contact the SellerYou must login to enquire about this ad.
Equipped with German design feeder supplied by KBA-MMS with non-stop feeding and stream-wise feeding system. There are 2 suction cups each for lifting paper and 2 other suction cups for moving paper. Height and angle of suction heads are easily adjustable.
Two front lays with micro adjustment feature accurate paper positioning. On both sides of the feeding section, there are pull and push side lays. Easy changeover of pull and push side guides by turning a bolt without removing and replacing the complete side guide. Micro-adjustment of cutting force by worm gear driven by motor and controlled by touch screen.
The 8 piece gripper bar design creates a bigger room for foil stamping section. It makes the adjustment of foil easier and more user-friendly. 10 individually controlled heating zones with tolerance +/- 1 *C. The maximum diecutting pressure is 200 tons.
1081 total views, 3 today