List Your Machine

SCS Automaberg Trim and Perf 600 (2014)

  • Sofia
  • Bulgaria
  • Bulgaria 98
  • Listed: 15th September 2020 2:40 pm

Contact the Seller

You must login to enquire about this ad.

Description:

Max. material size Up to 500 x 600 mm (sheet) / Up to 480 x 310 mm (die);

Min. material size 50 x 50 mm;

Mechanical performance up to 9,000 cycles per hour;

Power supply 400V / 3 PH / 50 hz;

Weight about 700 kg ;

Key product features:

Mobility of the device;

Compatibility – a table with adjustable height straps that makes it easy to connect the device in line with another device;

The possibility of processing a wide variety of materials;

Possibility of working in bypass mode (the device is then used as a transmission belt);

Possible equipment:

Belt feeder – pile height up to 150 mm; the option of topping up the stack without stopping the machine;

Belt feeder supporting folded sheets, sewn and glued blocks;

3 WAY module – the equation to the brands recommended for digital prints;

Belt pulley with a series meter;

The possibility of buying a device in the DUPLEX version – 2 stations performing various operations in one pass;

Types of modules for various works;

Die cutting – optional automatic extraction of felling, a product ready for packaging;

Cutting – high quality even in small formats;

Rounding corners – 4 corners in one pass;

Perforated perforation, perforation of holes for binding, perforation of corners;

Examples of applications:

Work on thin, also laminated cardboard with a thickness of up to 2 mm;

Brand reader when processing digital prints;

Die cutting of folded and glued blocks;

Processing non-standard materials – e.g. plastic up to 1 mm thick;

Perforation of stamps, perforation of holes for spiral binding, perforated perforation, punching of individual round holes, eurozawieszek;

Punching:

In the case of die-cutting, it is necessary to equip the die protection device – it allows for the installation of standard wooden blanking dies in the device;

Gripper – electronic die-cutting system – short set-up time before machine start guaranteeing repeatability

while reducing costs, possibility of cutting in rows (special feet on both sides that move the sheet further and cut the next row, after making the paw cuts return to the starting position);

The clipping system – cuttings fall down, the finished product is delivered to the receiving tray without waste;

Thermo Stick – gluing on the sides before stamping the slender materials so that they do not slide apart and can be cut in a higher pile;

Various matrices depending on the type of die material (metal dies under plastic, wooden under paper);

SIMPLE DECK – a module that collects stacked material – a solution dedicated to high-volume works in a fixed format – possible configuration for one fixed format;

Cutting:

Cutting block module up to 14 mm thick for thinner blocks after machining;

The possibility of feeding a folded premium (eg medical leaflets) and cutting it into 3 leaflets and rounding all corners in one pass;

Many other options, depending on the client’s needs;

The device supports very small formats which distinguishes them on the market;

Possibility of trimming 4 corners in one pass (3-15 mm radii);

No Tags

17 total views, 1 today

  

Listing ID: 8105f60c4398a07d

Leave a Reply

You must be logged in to post a comment.

  • www.exchange-capital.com

 

  • Absolute Engineering