Contact the SellerYou must login to enquire about this ad.
This machine is exclusively for the formation of fluting paper and laminating of single facer.
The Speed of this machine can reached 200 m/min. The production speed of 180m/min with a 30KW 50HP Motor and the speed can be adjusted.
The fluting type which can be used with this machine is E-B-C-A-F-G flute, we can make any type of the flute and width of machine that a customer requires.
Upper and lower corrugated roller, pressure roller, pre-heater roller are opperated by air cylinder. Set up uses a steam recovery system.
Oil immersed type gear box driven direct to lower fluting roller, pressure roller, glue roller and doctor roller heated by steam. Single drive mechanism to avoid glue sticking to roll surface when stopping.
The motion of the upper corrugated roller, pressure roller and glue roller are operated by the hydraulic cylinder.
Comes with a hydraulic pack and control.
Fingerless design. Equiped with suction stand *1, match up suction lid, which ensures that the corrugation of the fluting paper does not disperse in the process from the formation to the lamination.
This single facer uses a cassette quick change flute profile and change within 20 minutes, the steam joints and drive clutch also adopted quick change device in order to save time.
160 total views, 2 today