MARK ANDY 2200H – 12 COLOUR, FULL SERVO PRESS – 56125
Specifications
Description
MARK ANDY 2200H - 12 COLOUR, FULL SERVO PRESS
Primary machine and motion control
Shaftless servo drive unit and control with 750fpm maximum line speed, 240volt 60hz system
Full Rexroth servos throughout, 29 in total
Alan Bradley control
40” floor mounted cantilever unwind with transducer closed loop infeed pacing
Corotec Corona treater with ozone destruction unit
Ultrasonic sensor web guide for film
Additional 40” floor mounted cantilever unwind with DC motor drive c/w a servo driven digitally Controlled auxiliary web tension module for ultra thin films
4 x aerial mounted digitally tension controlled 32” capacity laminator/unwinds
Master control/sheeting module c/w closed loop exit pacing with transducer feed back
One remote human machine interface
2 x 40” floor mounted servo driven rewinds with taper tension control
Rider roll on 1st rewind
Length: approximately 48feet, 14.5metres
Manuals are available
Printing, Drying, Curing, & Registration
12 x print stations with Teflon coated idlers for film
12 x plate cylinders 12” repeat
16 x anilox rolls, 2 SMYK sets, plus assorted higher BCM’s for coating applications
1 x peristaltic ink pump, 2 gallon capacity, for gravure chamber
9 x hot air drying positions with enhanced hot air drying tunnels for film
2 x GEW maxim cool cure UV lamps 400w/in with UVT MLS UV power supply system
2 x Phoseon LED UV lamps, 16w/cm2
1 x Phoseon LED UV lamps, 8w/cm2 for pinning
6 line water chiller for UV LED lamps
BST Powerscope 3000 vision system
Capability for electronic registration control ERC + constant error correction CEC
Mark Andy 8” band width slot die coating head, ambient to +850c
Delpro 8” band width gravure print/coating chambered doctor blade unit, adjustable top blade angle
Die Cutting, Scoring, & Waste
7 x standard die cut stations/positions
1 x deep die station/position, special single extended die cut module, optional
5 x 16" repeat magnetic flexi die cylinders
4 x pairs of Rotometrics hydro jacks
3 x die hoists, fixed transverse beam
1 x die hoist, swinging beam
5 x 30” aerial mounted waste rewinds
2 x Rotometrics RD scorers
2 edge trim/slitters
Additional Web Handling
Turn bar
Delam relam unit
Multiple web gantry transport system
Additional gantry mounted ultrasonic sensor web guide for film
Full over and under idler roll sets
It can process supported and unsupported films and multiple webs (5) in thicknesses from 8mil down to 0.5mil
A uniquely flexible and capable machine
Why choose us?
We aim to inform choice and inspire action.
Our platform gives you complete control over bidding, buying and selling.
