This machine is exclusively for the formation of fluting paper and laminating of single facer.
Maximum machine speed 130 m/min. This type of single facer is a very good choice to the machine speed under 120 m/min and suitable for change the flute frequent. Main drive using AC-25~30HP motor.
Fluting type: E-B-C-A-F-G flute (also can make any type of the flute and cut-off size for the machine that customer required.)
Upper and lower corrugated roller, pressure roller, pre-heater roller are through by air cylinder. Set up the Steampipe system.
Oil immersed type gearbox driven directs the lower fluting roller, pressure roller, glue roller and doctor roller. Single drive mechanism to avoid glue sticking to roll surface when stopping.
The motion of the upper corrugated roller, pressure roller and glue roller are operated by the hydraulic cylinder. Set up a hydraulic unit control.
Fingerless design. Equip with suction stand *1, and suction lid which ensures that the corrugation of the fluting paper does not disperse in the process from the formation to the lamination.